Your home is your comfort-zone. You would do anything to make it as comfortable as possible, especially in extreme weathers. It is vital to have a good heating system, as it plays a major role in keeping you and your family members warm during winters. A good, energy-efficient furnace will consistently maintain warmth and also lower your energy bills. There are different types of furnaces available, such as combustion (fuel) and electrical furnaces. Choosing a furnace is not easy, and there are many factors to consider before you make a final decision:
All furnaces are rated by theirAnnual Fuel Utilization Efficiency (AFUE). AFUE represents the amount of heat produced per dollar spent on fuel. For example, a furnace with an efficiency rating of 85% indicates that heat is generated from 85% of the fuel that is burnt. Therefore,a furnace with higher efficiency rating will be able to deliver heat by consuming much lesser fuel and energy. Although these furnaces will cost more, they will be cost efficient in the long run. Today the minimum AFUE rating is around 78% and goes up to as high as 97%.
Choosing the right sized furnace is also important. It is generally believed that a bigger furnace is better than a small one, however that is not the case under varied circumstances. A furnace that is too large for your home will waste more energy than required, and increase the cost of heating. Not only that, you may end up having certain parts of your house too hot or humid. On the contrary, choosing a furnace that is too small may lead to lack of heating. A small furnace may need to work harder to provide consistent heat everywhere, increasing your electricity bill. An HVAC contractor will be able to guide you properly.
Another important point to consider is the location of your furnace. Depending on how your house is constructed, an HVAC contractor will evaluate your whole house and accordingly he will advise you the most appropriate place to install your new furnace.
Fuel and Economy
How you power your furnace will hugely affect your expenditures. Natural gasses are very common today, because they are widely available, clean and inexpensive. Oil, LP (liquid propane) gas, electricity and wood, are other options of fueling your furnace, but cost slightly more than natural gases.
Choosing a professional HVAC contractor
Make sure you contact the right technician for the selection and installation process of your furnace. Getting the job done through an unprofessional could result into inappropriate installation and hence you may have to repair and service your HVAC system every now and then. A certified and an insured contractor will charge you merely for his professional and quality work.
Make an informed decision. Weigh your budget against long-term considerations.Get expert advice so that you don't regret later.
Our Edmonton plumbing staff is here to help you. Pro Plumbing & Heating has served the Greater Edmonton area, Sherwood Park and St Albert with our Mr. Faucet location since 1988. Our professional plumbers truly enjoy working with people.
When you contact us, you’ll get nothing less than the full attention of one of our expertly trained staff.
At Pro Plumbing & Heating, we’re not satisfied until you are. You’ll especially be satisfied with our prices — $99 an hour and $55 for a service call.
Pro Plumbing & Heating Ltd.
6906 Whyte Ave NW
Edmonton, Alberta T6B 0E7
Phone: 587 410 4277
Text Us: 780-445-0986
Copyright © 2019 Pro Plumbing & Heating Edmonton. All Rights Reserved. Designed & Marketing by Edmonton SEO