Knowing how to fix problems around the house is a big plus for any home owner. You avoid the costs of hiring Edmonton plumbers. But at times, we tend to forget a few important details which put us in a fix.The best way to avoid such a situation is to increase your knowledge base. The more you know the lesser plumbing mistakes you commit, which in turn minimizes the damages.
So have you built up the courage to DIY fix that leak which has been bothering you for a week now? To help you in that task, below are a few things you should be aware of in order to avoid basic plumbing mistakes:
Know how to turn off the main water shut off in case of an emergency
Knowing the location of the main water shut-off is immensely helpful. If you are repairing a leak, you can always switch it off from its source but if it goes out of hand and it starts to flood uncontrollably, you can always run to the main valve and shut it off and avoid any unnecessary flooding.
Do not forget to remove the garbage disposal knockout plug
Installing a new garbage disposal is a very common DIY task. You would think that the job has gone great, but when you turn on the dishwasher, you find it is full of water. Why? You forgot to remove the knockout plug and properly hook the garbage disposal to the dishwasher.
Document the things you are taking apart so you can put them back together
When you are taking things apart, you always tend to forget what goes where when putting them back. It is always good to have your set of instructions saved in a home file so whenever you need to fix something you can always look it up. Or, better yet, have a picture of the plumbing device before you take it apart.
Do not over crank the faucets
Over cranking that faucet will not fix the leak. It will break the handle and complicate matters further. To actually fix the problem you will have to disassemble the faucet and work your way from there.
Avoid crooked installations
If you have enough skill to put in a new sink or a toilet, do not forget to level it. This is a surprising mistake that people tend to make and it is one that can alter the function and appearance of the project. It only takes a couple of seconds to use a level which can save a lot of cost of repairs in the future.
Not using pipes of matching material
When you are replacing a broken pipe, or just changing the pipe, make sure you use the same material and size. You want the pipes to fit together correctly and not just be a force fit, which would leak.
Use of excess drain cleaning chemicals
Getting down and dirty is the best way to clean drains. Too much reliance on chemicals will corrode the pipes. In the end, it won’t clear your clog correctly and corroded pipes would be a problem for you.
Increase your knowledge
Do not just dive into a job. Carefully understand what the problem is. Read a book about plumbing so that you know how the system works or talk to a professional if you need to understand specific things. Fill those knowledge gaps.
Know when to ask for help
Finally, it is important to know when to throw in the towel. At times, plumbing mistakes can go out of hand. Certain things are best left to professionals if you are not sure how to go about them. Instead of incurring more damage, hiring a professional will save your precious time and money.
DIY plumbing can be a hassle at times due to knowledge gaps. We are human beings and it is not possible to know everything. There is no sure way to know if you have committed a plumbing mistake until you are done working on it.
So if you do not want your DIY job to look like this, we at Edmonton Plumbers know how to fill those gaps and we would be happy to assist you. Help us help you.
Our Edmonton plumbing staff is here to help you. Pro Plumbing & Heating has served the Greater Edmonton area, Sherwood Park and St Albert with our Mr. Faucet location since 1988. Our professional plumbers truly enjoy working with people.
When you contact us, you’ll get nothing less than the full attention of one of our expertly trained staff.
At Pro Plumbing & Heating, we’re not satisfied until you are. You’ll especially be satisfied with our prices — $99 an hour and $55 for a service call.
Pro Plumbing & Heating Ltd.
6906 Whyte Ave NW
Edmonton, Alberta T6B 0E7
Phone: 587 410 4277
Text Us: 780-445-0986
Copyright © 2019 Pro Plumbing & Heating Edmonton. All Rights Reserved. Online Marketing & Designed & Marketing by Rapid Boost Marketing