If you have experienced basement flooding in your house, you surely know what kind of a mess it is! Extremely difficult to tackle, basement floodings generally cause heavy losses. If you have never been affected by basement flooding, you are lucky! Luck can’t always save your basement from flooding, hence, it’s best to take preventive measures in the future and avoid basement flooding with these simple tips.
Install and Maintain Eavestrough
Correctly installed eavestrough and downspouts prevent rainwater and melted snow from accumulating near the foundation of the house. Eavestrough and downspouts direct the water away from the house, thus protecting your house against water damage. No water pooling around the foundation of your house clearly means no seepage into the basement and no flooding. Install eavestrough and downspouts so that they throw water at about 3-feet away from your house. Clear this mechanism so that water can flow through them freely.
Clean the Sewer Line and Septic Tank
Clogging of the the sewer backup line is also another common cause of basement flooding. Sewer line backups can generally occur due to clogs, tree roots in the line, or broken line. Clear the sewer line regularly. Also, check the septic tank on a regular basis and clean it to prevent backflow and flooding with the waste materials.
See What You Drain
In order to avoid the chances of clogs in the plumbing system, especially the sewer line and septic tank, be cautious with what you drain down your plumbing system. Do not flush hair, toys, sanitary pads, and other bigger objects down your toilets. Avoid draining bigger leftover of food, greasy items, egg shells, fish bones, etc. into your kitchen drain.
Take Care of The Sump Pump
A sump pump is a great defense mechanism against basement flooding. It removes rain or groundwater accumulated in the basement. It is better to maintain this smart machine and back it up with the help of a generator and be prepared to tackle basement flooding.
Seal the Basement Windows
If you have substandard-grade basement windows, install window well covers and seal those basement windows. These covers are installed over the basement windows and your home’s foundation and they provide perfect waterproofing to the windows. These covers also help in keeping dust, leaves, debris, and pests at bay.
Fix the Structural Cracks
Closely inspect the ceiling of the basement, walls, and the point where the home foundation lies. If you find even a minor crack, get it sealed and repaired. Rainwater, melted snow, or groundwater can easily make its way through these structural cracks and result in basement floods.
Check Your Hot Water Tank
If you have kept your hot water tank in your basement, it is extremely important to keep an eye on it. Tank failure and leaks from the tank or plumbing pipes around it can easily go unnoticed and eventually result in basement flooding.
Call our professional plumbers in Edmonton to fix a thorough basement and home plumbing system. Our experts can identify potential problems and take necessary steps to provide solutions that can avoid basement flooding.
Clogged drains are hard to avoid and are nightmares to deal with. A lot of homeowners prefer pouring liquid drain cleaners to instantly get rid of the clogs. What they fail to understand is that liquid drain cleaners are just the temporary solutions with several harmful effects. Yes, you read it right. Below are 5 reasons how they are not-so-good options and you must avoid them.
1. Damage The Pipes
Most liquid drain cleaners are formulated with highly reactive acids, generally hydrochloric acid. While clearing the clogs, these highly corrosive cleaners also react with the inner surfaces of the plumbing pipes. They react with the metallic pipes and melt or deform the PVC pipes. Continuous use of these cleaners erodes the pipe surfaces and damage them extensively. These damages can also lead to cracks or broken pipes and leakages.
2. Harmful To Your Health
If the chemicals in these liquid drain cleaners can damage your plumbing pipes, just imagine how they can affect you and your loved ones. Drain cleaners, particularly the off-brand and inexpensive ones, have high toxicity levels. The fumes released from these cleaners may cause irritation to the eyes, nose, and affect throat and lungs of your and your family. Some cleaners are also hazardous to touch, and if they come into contact with your skin, they can cause burns.
3. Not 100% Effective
Liquid drain cleaners cannot be guaranteed to work in every situation. Sometimes, the clogs can be due to the broken pipe, internal corrosion, and other plumbing problem. Using these expensive drain cleaners for these problems will be a waste. However, using these cleaners on a recurring basis can just ruin your entire plumbing system.
4. Affect The Environment
The harmful chemicals in these liquid drain cleaners are also hazardous for the environment. These chemicals are some of the biggest pollutants and pollute the area surrounding your home and even far away. The gases that are emitted from the reaction that takes place between these chemicals and the metallic pipes is unpleasant and is harmful to nature. Some of these smell even worse than rotting waste or dead bodies. The chemicals that are drained in the seas and rivers affect the marine life.
5. May Lead To Cracked Toilets
These cleaners are not only bad for your plumbing pipes but also for the toilets. The chemicals are meant to heat up when in use. This heat helps in dissolving the clogged materials and clearing the clogs. If you pour these cleaners in your clogged toilets, there are very high chances of the cleaners not getting fully flushed. They remain in the bottom of the toilet bowl, causing the heated liquid to crack the porcelain.
The best way to unclog even the most severe clog is with professional help. Call our Edmonton professional plumbers if you have minor or major clogs anywhere in your home’s plumbing system. With the help of the in-depth knowledge, years of experience, and right tools and equipment, we ensure that we provide satisfactory plumbing services.
If renovating your kitchen is on your mind, replacing your kitchen sink should also be a task in your list. Replacing the basic yet largely useful components of your kitchen such as the sink and faucets can give your kitchen a quick makeover and also lower the chances of various plumbing problems in the future. If you are already planning for kitchen sink replacement, you must keep several things in mind. Some of the major things are listed below.
1. Right type of kitchen sink
Several types of kitchen sinks are available in the market. Select the one that suits your needs and preferences. The main types of sinks include:
These sinks have edges that directly sit on the cutout. These are the easiest to install as all you have to do is find one sink that exactly fits in the sink cutout. They can be lifted easily to clean the area. They are relatively inexpensive.
These sinks come in combination with the entire countertop and provide a seamless look. Being fixed with the countertop, replacing these kitchen sinks are difficult as you will have to replace the entire assembly. Needless to mention, these are the most expensive of all the types.
These sinks are installed under the counter by sealing the edges of the sinks to the counter cutout. These are the most easy-to-use and clean sinks and are moderately expensive, depending on the material you choose.
2. Ensure To Fill The Space
Just because you like a particular sink, don’t select and buy it blindly. Make sure you measure the counter cutout accurately and find the sink that can fit in it. A sink that is too small for the cutout will leave gaps and provide space for rodents to move around. On the other hand, a sink that is too big won’t fit and you’ll end up wasting money.
3. Measure The Sink Tailpiece
If you buy a kitchen sink that has a very deep sink bowl, it won’t drain properly. In such a case, you will have to remodel the entire waste assembly and the drain line inside the wall. This will be both, time-consuming and expensive. Hence, measure the space between the sink strainer and the connection of the sink and the drain. That measurement is the extra depth that can be added to the sink bowl without lowering the assembly.
4. Clear The Waste Assembly
Before the kitchen sink replacement, make sure you clear the waste assembly that consists the garbage disposal and the drains. Remove the food and debris leftover and the sediments so that you don’t have to open the entire assembly too soon after installing the new kitchen sink.
Always choose the experts such as our professional plumbers in Edmonton for replacing your kitchen sink or installing a new one. We ensure to provide the best results so that you can use your kitchen effortlessly for decades to come.
Honing your plumbing skills may not be useful for your resume but it is certainly going to help you manage your plumbing issues better. With a basic knowledge of plumbing, you can fix minor plumbing problems on your own and save some money. Every home has a few common plumbing issues which hinder your day-to-day life. Let us take a look at a few home plumbing repair tips that you should definitely know.
Fixing Weak Water Pressure In The Shower
Over a period of time, the water pressure in your shower can get reduced. This is due to lime scale build up in the shower. This can be fixed easily using a descaling solution, screwdriver, and a bowl. All you have to do is unscrew the shower head and immerse the spray plate in a descaling solution and leave it for some time. Remove limescale particles and replace the shower head.
Unclogging The Sink Drain
Clogging of your bathroom sink is a common phenomenon in most homes. In order to unclog a sink drain, you will need a drain plug adjustment arm. The first step is to remove the spring tab from the drain plug adjustment arm. Then remove the ball valve from the spring trap and remove the pop-up plug. You can then remove the debris clogging the sink drain.
Traps are one of the common areas where blockages occur. Usually, these blockages can be cleared using snakes. But if it is a sink trap, then it needs to be dismantled to remove the blockage. This can be done using a bowl, old toothbrush, and replacement washers. First, undo the sink trap, and place a bowl below it to catch any water from the trap. Then using a toothbrush clean the trap, and wash it in a bucket of clean water.
Fixing a Clogged Toilet
A clogged toilet can ruin your mornings horribly and can cause delays in your daily routine. But if you manage to fix the issue in time, you can save your family from a lot of misery. To fix a clogged toilet you will need a plumbing snake, plunger, rubber gloves and toilet auger. To begin with, you can use a plunger and push it in and out with enough water in the bowl. If your toilet does not get unclogged with a plunger, then try using a plumbing snake.
Mastering these tips will help you deal with minor plumbing issues. But for the major ones you cannot really take a chance. So it’s best to opt for a professional plumber for such issues. Pro plumbing offers all kinds of plumbing services, including gas fitting, dishwasher installation and repair, furnace repair, gas line installation, water softener installation to name a few. Get in touch with us to know more about our services.
Your bathroom is mostly the wettest part of your home and also the most ignored one. What most homeowners fail to understand is that bathroom issues not only tarnish the environment in there but also result in a lot of water wastage. Be a smart homeowner, inspect your bathroom regularly, and check for the signs of the following bathroom plumbing defects:
1. Visible Pipe Leakage
This is one of the most common bathroom plumbing defects. Loose connection, degrading pipe quality, cracks or holes in the pipe, and high water pressure can result in continuous drips and leaks from the visible plumbing pipes, mostly at the joints.
2. Internal Leakage
It has been quite a few hours and you haven't used your bathroom. Still, you notice wet patches or even drops from a particular spot on your bathroom wall/s. Ever wondered why? A possible reason behind this unusual wet patch on the wall or near the bathroom roof can be an internal pipe leakage. The plumbing pipes that run behind the walls can be damaged or corroded and result in leaks.
3. Low or High Water Pressure
When you open a faucet and only obtain trickles of water from it, you have low water pressure, whereas if you obtain a dense gush of water, you have high water pressure. Water pressure problems can occur due to several reasons such as defects in plumbing pipe and problems from the main water supply source.
4. Faulty Showerheads and Faucets
Over the years, your metal showerheads and faucets can lose their efficiency and start giving problems. The major signs of their failure include the broken handle, rusting or corroding, and weird noises from them as water flows through the showerheads and faucets. The best solution to this problem is replacing the plumbing fixtures in your bathroom.
5. Dripping Faucets
Faulty, broken, or dislocated rubber disc inside the faucets, also known as washer, and high water pressure results in dripping faucets. Most homeowners don't consider it as bathroom plumbing defect and often avoid it. But constantly dripping faucets lead to high volumes of water wastage and higher water bills.
6. Running Toilet
Your toilet can keep running even when not in use in conditions when the float in the tank is imbalanced, the flapper valve doesn't fit properly, sediments in the toilet mechanism, or when the fill tube becomes loose. In either case, gallons of water can be lost if you don't call our professional plumber and get it fixed.
7. Slow Drainage of Water
When you notice that water from your toilet, bathtub, or bathroom drains take forever to drain out, understand that you have clogged drains or sewage system. Clogs in the drainage system narrow the path of water flow and reduce the speed of drainage, thus causing waterlogging and backflow in the toilet, bathtub, or in the bathroom.
If you are experiencing any of these bathroom plumbing defects, don't try to avoid it just because you are a busy bee or wish to save a few bucks. Call our professional plumbers in Edmonton immediately. It is always better to seek a professional help and get fully assured solutions.
As a homeowner, you need to be prepared for any kind of emergency. Let it be a medical emergency or a plumbing issue, you should be in a position to deal with anything that comes your way. With so many plumbing fixtures at home, there is a high likelihood that your sink can get clogged or your pipe can start leaking. We all know professional plumbers in Edmonton can be expensive. So you must be prepared with the essential plumbing tools at home to fix minor plumbing issues on your own. A lot of times it is these minor issues that turn into major ones and then you are left with no option but to call a professional plumber.
1. Tongue and Groove Pliers
This is a common tool used by most plumbers to grab, pull, twist, hold, tighten or loosen something. So make sure you have a pair of tongue and groove pliers in your tool box. This is a slip-joint plier with serrated jaws angled at about 45-60 degrees from the handles giving it a curved appearance.
A hacksaw is used to cut through metal pipe, hardware, nuts, screws, nuts and bolts, and plastic pipes. When you buy a hacksaw, make sure you buy extra blades, just in case the blade of the hacksaw gets blunt or breaks.
3. Metal File
You can use a metal file to smooth the edges of snipped metal pipes. Metal files are available in different sizes. You should ideally have a rat tail file and a half round file in your tool box.
A plunger is an essential tool for any household. There are two main types of plungers- cup plunger and flange plunger. A flange plunger is used to clear clogs in toilets whereas a cup plunger is used to clear clogs in sinks and bathtubs.
5. Basin Wrench
It is used to tighten or loosen nuts on sink faucets, and the best part about a basin wrench is that it can go into deep, narrow spaces behind sinks in order to reach the faucet bolts. A basin wrench is a must have in your toolbox.
6. Hand Auger
When a plunger fails to clear a clog, then the next tool you can use is a hand auger. You can use a hand auger to clear the clog in sinks and drains but not in toilets.
7. Tubing Cutter
You can cut copper pipes with a tubing cutter. There are two types of tubing cutter- standard tubing cutter, mini tubing cutter.
With a well-stocked tool box, you will be ready to take care of any plumbing emergency that you might come across at home. You can fix minor plumbing issues with these tools. If you fail to fix the plumbing issues at home, then you can reach out to a professional plumber in Edmonton.
Immortality is only found in fictional stories and movies. No one that we know of has lived forever. Everyone on this planet has a definite life span. This applies to your home plumbing system as well. Let it be the pipes, sinks, toilets, showers or faucets everything has its own life expectancy. As homeowners, you should be aware of the average lifespan of your home plumbing system. It is a different thing that the lifespan of all plumbing fixtures depends on the usage, weather, installation, maintenance, and quality of products used.
Let’s take a look at the life expectancy of plumbing pipes and fixtures in your home.
Supply pipes are usually made of galvanized steel or copper or brass. The average lifespan for each of these pipes vary. A copper pipe can last up to 50 years, a pipe made of galvanized steel can last for up to 20-50 years and a brass pipe can last up to 40-70 years.
Drain lines are usually made of cast iron or PVC. The average lifespan of a drain line made of cast iron is 75-100 years whereas a PVC drain line can last up to 50 years.
The lifespan of a faucet depends on the manufacturer, the quality of materials used to make it and its usage. On an average, the lifespan of a good quality faucet is 15-20 years.
Water Softener and Sump Pump
The average lifespan of a water softener is up to 20 years whereas the life expectancy of a sump pump is about 7 years.
Toilets, Urinals, and Shower Heads
The life expectancy of toilets, urinals and shower heads is 100 years. The life expectancy of a shower head can be lower than 100 years, if it gets spoilt due to excessive mineral build-up.
The life expectancy of a kitchen sink is about 100 years.
If you have been using all your plumbing pipes and fixtures beyond the above-given lifespans, then you might want to consider getting them replaced or repaired or at least inspected. You can call our Edmonton professional plumber to get your plumbing fixtures installed. Pro Plumbing is a plumbing company based in Edmonton. Our plumbers cater to all kinds of plumbing issues. To know more about our services, get in touch with us at the earliest.
Are you confused about selecting a new one? Read on to understand which one is best for you. A sump pump is used in the basement of your home. Its main function is to remove water accumulated in your sump basin. You certainly don’t want your basement to be flooded. So save yourself from the misery of a flooded basement by selecting the right sump pump.
There are many types of sump pumps available in the market.
Primary Sump Pump
Primary sump pumps are commonly found in most houses. It prevents seepage water from entering the basement and causing floods. They can pump thousands of gallons of water in an hour. Within primary sump pump, there are two sub types of sump pumps – pedestal sump pump and submersible sump pump.
Battery Backup Sump Pump
These sump pumps are ideal for places where there are chances of the power going out. Battery backup sump pump provides an insurance for such situations. In the case of a black out, the battery unit in the pump will start working providing the pump with power so that it continues functioning even without electricity.
Combination Sump Pump
Combination sump pumps provide the best of both worlds. It is a combination of the primary sump pump and the battery backup sump pump. This helps you stay protected in normal conditions as well when there is a power outage. This is the best solution when it comes to home flood protection.
The main function of a sewage pump is to pump sewage waste from your home to the septic tank. But they can be used as a sump pump. The key difference between a sewage pump and a traditional pump is that it can pass solids of up to 2". They can be installed in the septic tank or in a pump chamber.
You can choose the pump most suitable to you based on your needs. Other factors to consider while selecting a sump pump are base type and horsepower.
Select a sump pump based on its base type. Sump pumps are available with pedestal mounts or are submersible. A pedestal-mounted sump pump uses a float system to turn the pump on and drain water from the area. A submersible pump sits below the water level and is ideal for a basement area that floods during the rainy season.
Make sure you select a pump for the power needed to empty the area of water. There are sump pumps available at various horsepower levels depending on the need and usage. The pump will require more horsepower if it has to transport water to a large distance.
If you still need help with selecting a sump pump, then consult a professional plumber in Edmonton. Pro Plumbing is Edmonton’s most trusted plumbing company. To know more about our plumbing services, get in touch with our experts.
Our Edmonton plumbing staff is here to help you. Pro Plumbing & Heating has served the Greater Edmonton area, Sherwood Park and St Albert with our Mr. Faucet location since 1988. Our professional plumbers truly enjoy working with people.
When you contact us, you’ll get nothing less than the full attention of one of our expertly trained staff.
At Pro Plumbing & Heating, we’re not satisfied until you are. You’ll especially be satisfied with our prices — $99 an hour and $55 for a service call.
Pro Plumbing & Heating Ltd.
6906 Whyte Ave NW
Edmonton, Alberta T6B 0E7
Phone: 587 410 4277
Copyright © 2017 Pro Plumbing & Heating Edmonton. All Rights Reserved. Designed & Marketing by Edmonton SEO